Grezzy+ Hyperlube 125ML

No more sticking, no more getting everything covered in grease: Grezzy+ Hyperlube formula is an advanced chain lubricant consisting of a combination of wax and PTFE. Because of its careful composition, dirt does not adhere. This results in a completely dry and clean lubricant. As a result, sand and dirt will stick to the chain little to none, resulting in less wear on the drive.

Clean: Almost completely minimizes the residue left behind after use
Specific:Suitable for dry and wet conditions
Effective: After application, a wax layer is formed over the entire drive to reduce friction, make shifting smoother and extend the life of both chain and sprockets.

How to use: We recommend that before the first use, completely and thoroughly clean and degrease the chain and transmission using our degreaser "drivetrain formula" so that no remnants of other lubricant mix. Then apply to the dry chain "hyperlube" link by link so as to ensure careful internal lubrication. It is important to apply a generous amount when first used, as this is the first lubrication after the transmission has been left completely dry and without lubricant. Then rotate the transmission to distribute everything and let it dry for at least 4-5 hours.

From the first use, it is recommended to gently clean and dry the chain after each wash using a dry cloth or paper and reapply "hyperlube". Now it is sufficient to apply only a thin layer of wax to the chain to strengthen the lubrication and allow it to dry. Do give the Hyperlube another few hours to dry.